Step Safe Roll On in Sydney

Step Safe Roll On is Shieldcoat’s water based Step Safe that you roll on instead of spray. It comes in 15L pails, in 36 standard colours or tinted to almost any colour, carries a 5 year warranty, and we stock it at our warehouse in Wetherill Park.

Where do you use Step Safe Roll On?

Paths, driveways, patios, car parks and sports courts, inside or out, including areas with light vehicle traffic. It suits jobs where a roller makes more sense than a hopper gun. For the sprayed, textured finish with fleck, that’s Step Safe Heavy Duty.

How it goes down

1. Fill cracks with Slab Repair and pressure clean at 3000psi or more. Let it dry for at least 24 hours.
2. Prime. Shieldcoat’s current datasheet uses a generous coat of Primer X (Concreshield Primer).
3. Roll two coats of Step Safe Roll On with an 11mm nap roller, the second at 90 degrees to the first. North to south, then east to west once it’s dry.
4. Shieldcoat finishes it with one coat of Floorshield in the same colour.

The same golden rule applies as every coating we sell: concrete at least 28 days old and dry before you start. Coverage is 4 to 5m² per litre per coat, and it cleans up with water. Shieldcoat’s datasheet allows foot traffic overnight and vehicles after 7 days.