In stock in Wetherill Park
Shieldcoat spray resin supplies in Sydney, step by step
Everything for a spray resin job, in the order you'll use it, from masking to the clear coat. Shieldcoat coatings plus the masking, prep and spray gear to go with them, all at our Wetherill Park warehouse in Sydney.
Step 1, Mask and protect: masking film and tape
Overspray on a wall or window is the first thing a client sees. Mask everything you're not coating before the gun comes out.
Step 2, Fix the cracks: concrete crack repair
Concrete moves. Fill every crack with a flexible repair first, or it shows straight back through the coating.
Step 3, Prime: concrete primers and rollers
The primer is what everything else grips to. Primer X on most concrete, WB Primer over water based coatings. Both rolled, never sprayed.
Step 4, Coat: Step Safe Heavy Duty spray resin and concrete coatings
Two base coats and two fleck coats of Step Safe Heavy Duty through a hopper gun, or roll on Step Safe or Concreshield.
Gear and additives
Step 5, Seal: clear concrete sealer
Never seal on the same day. Come back the next day and mist on two very thin coats.
Step 6, Clean up: gloves and painters rags
OctaGrip nitrile gloves keep primer, sealer and xylene off your hands, and a bag of cotton painters rags covers overspray, spills and wiping down the gear. The gun cleans up with water and a spray of WD40.
Contractor? Get trade prices.